home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Gold Collection
/
Software Vault - The Gold Collection (American Databankers) (1993).ISO
/
cdr33
/
twain_pt.zip
/
README.TXT
next >
Wrap
Text File
|
1993-05-17
|
1KB
|
42 lines
This disk contains the TWAIN drivers for Scanplus scanners.
The two files are: 1) TWAIN.DLL 22944 Bytes
2) SCANPLUS.DS 167620 Bytes
Following are the steps needed to install the drivers.
1) Install the device driver that came with your Scanplus scanner as
indicated in the manual. Make sure that your driver is dated after
December 15, 1992.
Here is the list of the drivers:
SCANDEVC.SYS <--- Driver for Scanplus Color 6000.
SCANDEVC.SYS <--- Driver for Scanplus Color 3000.
SCANDEVB.SYS <--- Driver for Pagereader 300.
2) Make a subdirectory called TWAIN under your windows directory.
3) Copy the SCANPLUS.DS file to the C:\WINDOWS\TWAIN directory.
4) Copy the TWAIN.DLL file to the C:\WINDOWS directory.
>>> ZSoft users <<<
If you are using any ZSoft software, you need to load their driver
also. Their driver name is HPSCANER.EXE. Our driver, SCANDEVC.SYS
must be loaded before HPSCANER.EXE. Zsoft automatically installs the
HP driver named SJII.SYS. You do not need to install this driver
to use our scanners. SCANDEVC.SYS must be loaded instead.
You also need to set the contrast control switch in the SCANDEVC.SYS
to zero when using Zsoft software. Your line in your CONFIG.SYS file
should look as follows:
device=c:\SCANDEVC.SYS /C0
The previous line sets the color mapping to zero (0). Color scanning
needs color mapping to enhance viewing.